jutaiProducts---Vehicle Detector
banline

Vehicle Detector Installation and Diagnoses

Name:Installation and Diagnoses

loop detectorDescription:

1.Please refer the upside diagrams for loop size and installation.
2. We recommend to use 0.75mm˛ multi-core copper wire. The total wire length include feeder can be up to 500m.
3. The loop should be rectangular and avoid any right angle. The recommended length is from 1.0m-2.0m, the recommended width is from 0.8m-1.2m.
4. The perimeter and turns:


5. The feeder must be twisted once per 15mm.
6. More turns, lower frequency. Less turns, higher frequency.
7. Place the loop away from the moving metal.
8. Any vehicle can be detected, when the speed is less than 200km/h
9. Relay capacity, 220VAC/3A, 110VAC/3A, 24VDC/10A.
10. If the detector is not working, please check as following
a. Press RESET.
b. If red LED indicator is not in full lit, please check power supplier.
c. If amber LED indicator blink, it may be: loop is short cut or no. of turns is not enough (blink slowly); Loop is open or no. of turns is too many (blink fast).
d. No. of turns is not enough: change the frequency to lower. If frequency is still too high, you must add more turns.
e. No. of turns is too many: change the frequency to higher. If frequency is still too low, you must leave some turns.

Ordering Information:
LD-100 single channel, boxed, 1 type 11 pin connects 100-240VAC (EU standard)
LD-102 single channel, boxed, 1 type 11 pin connects 12-24VADC (EU standard)
LD-105 single channel, boxed, 2 type 11 pin connects 100-240VAC (USA standard)
LD-106 single channel, boxed, 2 type 11 pin connects 12-24VADC (USA standard)

 


Dual channels traffic vehicle detectors

Similar Vehicle detector Link:
Single channel traffic detector
gate loop detector
inductive loop vehicle detector
vehicle loop detector installation
vehicle loop detector price
vehicle loop detector manufacturers


Keyword:vehicle detector,traffic detector, Double Loop Vehicle Detector,Vehicle Loop Wire, Automobile Sensor,vehicle loop detector installation,vehicle loop detector module