jutaiProducts

---Single Channel Vehicle Loop Detector
banline

Dual channels traffic vehicle detectors(Click Here)

Name:Vehicle Loop Detectors Installation

loop detector1.Detector position and installation:
*Install the detector in a weaterproof housing.
*The detector should be as close to the sensing loop as possible.
*The detector should always be install away from strong magnetic fields.
*Avoid running high voltage wires near the loop detectors.
*Do not install the detector on vibrating objects.
*When the control box is installed within 10 meters of loop, normal wires can be used to conneect to the control box to the loop.More than 10 meters requires the use of a 2 core sheielded cable.Do not exceed 30meters distance between control box and loop.

2.Loop Installation:

The loops are sealed using a "quick-set" black expoxy compound or hot bitumen mastic to blend with the roadway surface.

Loop perimeter
Cylinder numbers
3~4M
6
4~6M
5
6~10M
4
10~20M
3
20M~UP
2

 

The LD-100 is designed to accommodate numerous applications, can be adjusted intelligently to any environments and virtually eliminating false detection.
On the front panel, the four selectable loop frequencies (20~80 KHz) can completely eliminate any crosstalk.
If intermittence happen or failed loops get self-healed, the detector will resume to normal operation without manually reset the detector.
Self-tuning & complete environmental tracking.
Two-color LED status indicator for Detect, Power, and Loop Fault indication.

Specifications:
LD-100:85-240VAC (50Hz-60Hz)
Loop Inductance
20-2000μH
Sensitivity
ΔL 0.01% to 2.56% with 16 Selectable Levels
Response Time
8~80 ms
EURO 11-pin connect

         brochure            specification


 

Keyword:vehicle detector,traffic detector, Double Loop Vehicle Detector,Vehicle Loop Wire, Automobile Sensor,vehicle loop detector installation,vehicle loop detector module